Aluminium Alloy Pulp Drying Machine System Customized

Aluminium Alloy Pulp Drying Machine Directly Supplied By Chinese Factory

Due to the particularity of the paper industry, the principle of centralized pulping and decentralized paper-making is generally adopted to arrange the production of raw materials (pulp) and finished paper. First, it can make the production of pulp close to the forest land, and the production of paper close to the consumption location, reducing the transportation cost of pulping raw materials such as wood or paper. Second, it can make the pulping production with relatively large energy consumption, water consumption and pollution far away from the densely populated consumer market. However, in order to facilitate the transportation of pulp board, it is necessary to dry the pulp and make it into pulp board during the production of pulp. The hot-air drying pulp machine is the main equipment for making pulp board from pulp, which can effectively solve the problems of production, transportation and storage of these raw materials for paper production.

Material

Stainless steel, carbon steel, aluminium alloy

Product features

Hydraulic headbox with dilution water transverse quantitative adjustment device shall be adopted to ensure the horizontal quantitative deviation ≤ ± 2%;

The web section adopts wedge-shaped closed double-web dewatering with symmetrical dewatering at the top and bottom of the static panel, which has low power consumption. The power consumption per ton of pulp in the whole pulp line is ≤ 100kW/h;

The press section is optimally designed and equipped according to the pulp type and speed.

The pulp board drying section is designed based on the air-floating non-contact drying principle. The paper web is dried by the hot air from the upper and lower boxes impacting the paper surface to provide energy and heat, and air cushion is generated to support the paper web operation. The steam consumption is quite low. the steam consumption per ton of pulp ≤ 1.1 tons.

Application

It is mainly suitable for pulp board production and processing in pulp and paper industry

Working principle

This pulp machine is mainly composed of web section, press section, drying section, foundation section, transmission section, control system (pneumatic, hydraulic and electrical) and auxiliary equipment. The web section adopts double-web dehydration mode, and the press section is composed of multichannel press. Hot air drying is adopted for drying section.

Specification

Paper machine speed, web width, weight, paper dryness and output requirements

If the customer provides the above parameters, technical proposal and equipment selection can be arranged soon.